6-30S BMS PowerSafe

External powerbox | 750 A | CAN bus | Serializable | EN61508 | SIL2 compliant

eMobility

Automotive

bms-powersfe automotive

Description technique

Cells management

  • Possibility to connect in series several BMS in order to manage a battery pack with a voltage up to 1000 Volts (depending on precharge management)
  • Management of 6 to 18 lithium cells in series* compatible with all cell technologies (NMC, LiFe, LiPo,…),
  • Measurements accuracy:
    • Cell voltages: +/- 5 mV
    • Temperatures: +/- 1°C
    •  
  • Management of 6 NTC temperature sensors
    • 3 digital measurements used by the software
    • 3 analogic measurements used by the hardware redundancy

Protections

  • Hardware redundancy for voltage and temperature measurements in order to reach a high level of safety (SIL2 of EN61508 standard)
  • Overcharge and undercharge, tunable by software
  • Overtemperature and undertemperature, tunable by software
  • Overcurrent: 2 levels in discharge, 1 level in discharge tunable by software
  • Short circuit hardware protection (resettable electronic fuse)

Balancing

  • Passive balancing with a 150 mA bypass current per cell (on the BMS)

Power box

  • Bidirectional measurement of the battery current with a hall effect sensor
  • Charge and discharge management
  • Power box management up to 750 A:
    • Command of an external 12V electromechanical contactor**
    • Command of a precharge circuit (included on the board or external)
    • Possibility to control two additionnal 12V contactors**

Smart functions

  • SOC and SOH calculation
  • Advanced self-diagnostic of the board
  • Communication by CAN bus 2.0B (opto-isolated)
    • Motor controller management by CAN bus
    • Charger management by CAN bus
  • Advanced supervision software
  • Black box integrated with defaults history storage and life counters
  • Possibility to reprogram the firmware by CAN Bus

Power supply/consumption

  • Supply of the BMS directly on the battery pack
  • Low consumption in standby mode: < 500 µA

Mechanical format

  • 113 mm x 180 mm x 12 mm
  • Can be potted to be used in harsh environment

* Factory setting
** No need for an external 12V supply

Télécharger l’information

Document au format .pdf

Merci d’indiquer l’adresse email où envoyer le lien de téléchargement.